Two-component, transparent synthetic resin that does not yellow.
Mix components A and B in a 1:1 volume ratio and mix well. Media inks can be used for coloring, and art mica or metallic pigment powder can be added to the mixture to achieve a metallic, sparkling effect. Smoke foil, galaxy flakes, colored foil flakes, and sprinkles can also be mixed into the resin. The mixture can be used for surface treatment or poured into a silicone mold. Bubbles can be removed with a kitchen torch. The product is primarily recommended for smaller objects and castings.
If using a mold, the thickness of the poured mixture should not exceed 20 mm. If you want a thicker object, you can achieve this by pouring several layers. The poured object can be removed from the mold after 24 hours of drying, at which point it is still flexible. The total drying time is 72 hours, after which the material becomes very hard and resistant. The tools can be cleaned with rubbing alcohol. The hardened resin can be sanded and polished.
- 2x125ml = 250ml/set
- 1:1 mixing ratio
- water clear
